Opel Corsa: Warning lights, gauges and indicators / Control indicators
The control indicators described are
not present in all vehicles. The
description applies to all instrument
versions. Depending on the
equipment, the position of the control
indicators may vary. When the
ignition is switched on, most control
indicators will illuminate briefly as a
functionality test.
The control indicator colours mean:
red : danger, important reminder
yellow : warning, information, fault
green : confirmation of activation
blue : confirmation of activation
white : confirmation of activation
See all control indicators on different
instrument clusters 3 62.
Engine oil level monitor
The state of the engine oil level is
displayed in the Driver Information
Centre for a few seconds following
the service information after switching
on the ignition...
Turn lights
illuminates or flashes green.
Illuminates briefly
The parking lights are switched on.
Flashes
Turn lights or the hazard warning
flashers are activated...
Other information:
High beam
Push to switch from low to high beam.
Push again to deactivate high beam.
High beam assist
This feature activates the high beam
when driving in dark surroundings
and the vehicle speed is faster than
45 km/h.
The camera in the windscreen
detects the lights of oncoming or
preceding vehicles...
The front-rear parking assist
measures the distance between the
vehicle and obstacles in front and behind the vehicle. It informs and
warns the driver by giving acoustic
signals and display indication.
It uses two different acoustic warning
signals for the front and rear
monitoring areas, each with a
different tone frequency...