The sunblind is operated manually.
Slide the sunblind to the desired
position.
Other information:
Remove the protective cover by
pulling.
Withdraw the bulb socket from the
reflector housing.
Detach the bulb from the bulb
socket and replace the bulb.
Insert the bulb socket into the
reflector housing.
Fit the protective cover on.
..
Note
Any deviation from the instructions
given in this section may lead to
temporary deactivation or
disturbance of the stop-start system.
When the vehicle battery is being
replaced, please ensure that there
are no open ventilation holes in the
vicinity of the positive terminal. If a
ventilation hole is open in this area, it
must be closed off with a dummy cap,
and the ventilation in the ..