Opel Corsa: Forward collision alert / Deactivation
The system can only be deactivated
by deactivating the active emergency
braking in the vehicle personalisation. When ignition is switched on
next time, system is activated.
Three alert sensivities can be
selected in the settings of the active
emergency braking within the vehicle
personalisation.
The chosen setting will be memorised
when the ignition has been switched
off...
Forward collision alert is designed to
warn on vehicles, but may react also
to other objects.
In the following cases, forward
collision alert may not detect a vehicle
ahead or sensor performance is
limited:
driving on winding or hilly roads
driving during nighttime
weather limits visibility, such as
fog, rain, or snow
the sensor in the windscreen or
the radar unit behind the front
..
Other information:
High beam
Push to switch from low to high beam.
Push again to deactivate high beam.
High beam assist
This feature activates the high beam
when driving in dark surroundings
and the vehicle speed is faster than
45 km/h.
The camera in the windscreen
detects the lights of oncoming or
preceding vehicles. Each LED on
right or left side can be triggered or
faded out particularly according to the ..
Vehicle identification number
The Vehicle Identification Number
may be embossed on the instrument
panel, visible through the windscreen,
or in the engine compartment on the
right body panel.
Identification plate
The identification plate is located on
the front left or right door frame.
Information on identification label:
1 : manufacturer
2 : type approval number
3 : vehicle identification..