Opel Corsa: Electronic key system / Remote control operation
Unlocking

Press
.
Note
A short time after unlocking with the
remote control the doors are locked
automatically if no door has been
opened. A precondition is that the
setting is activated in the vehicle
personalisation.
Unlocking mode can be set in the
vehicle personalisation menu in the
Info Display. Two settings are
selectable:
- All doors, load compartment and
fuel filler flap will be unlocked by
pressing
once.
- Only the driver's door and fuel
filler flap will be unlocked by
pressing
once. To unlock all
doors, load compartment and
fuel filler flap, press
twice.
Select the relevant setting in the
Vehicle personalisation.
Unlocking the tailgate
Press
to unlock the tailgate
only.
Unlocking and opening the tailgate.
Locking
Close doors, load compartment and
fuel filler flap.

Press
.
If the vehicle is not closed properly,
the central locking system will not
work.
Confirmation
Operation of the central locking
system is confirmed by the hazard
warning flashers. A precondition is
that the setting is activated in the
vehicle personalisation 3 77.
Enables, depending on version, a
keyless operation of the following
functions:
central locking system
ignition switching on and starting
the engine
The electronic key simply needs to be
on the driver's person...
Electronic key system operation
This system allows automatic vehicle
locking and unlocking simply by
detection of the electronic key. The
electronic key must be outside the
vehicle...
Other information:
Trailer loads
The permissible trailer loads are
vehicle and engine-dependent
maximum values which must not be
exceeded. The actual trailer load is
the difference between the actual
gross weight of the trailer and the
actual coupling socket load with the
trailer coupled...
Setting speed by the driver
The adaptive cruise control has to be
switched on manually at a speed
between 30 km/h and 180 km/h. For
vehicles with automatic transmission,
the automatic selector lever must be
in position D or M.
Accelerate to the desired speed and
move the thumb wheel to SET/-...